2-300

2-300

With a 3” panel depth and available in minimum 22 gauge, AGWAY’s 2-300 fluted panels provide 24” coverage and offer great strength and spanning capabilities, as well as a very bold and striking appearance.

PROFILE PICTURES

1. Steel conforms to ASTM A653.
2. Section properties are in accordance with CSA-S136-07.
3. Values in row “S” are based on strength.
4. Values in row “D” are based on a deflection limit of 1/180 of the span.
5. Web crippling not included in strength values. See example calculation in notes to designer.
6. Contact the sales department for stocked colours and gauges.
7. The load table contained on this data sheet was prepared by Dr. R.M. Schuster P.Eng. Professor Emeritus of Structural Engineering, University of Waterloo, Ontario, Canada.

1. Steel conforms to ASTM A653.
2. Section properties are in accordance with CSA-S136-07.
3. Values in row “S” are based on strength.
4. Values in row “D” are based on a deflection limit of 1/180 of the span.
5. Web crippling not included in strength values. See example calculation in notes to designer.
6. Contact the sales department for stocked colours and gauges.
7. The load table contained on this data sheet was prepared by Dr. R.M. Schuster P.Eng. Professor Emeritus of Structural Engineering, University of Waterloo, Ontario, Canada.

SPECIFICATIONS

GAUGE LENGTH COVERAGE
MINIMUM MAXIMUM MINIMUM MAXIMUM
22 16 48 600 24
GAUGE LENGTH COVERAGE
MINIMUM MAXIMUM MINIMUM MAXIMUM
22 16 1219.2 15.24 610

SECTION PROPERTIES

BASE STEEL
THICKNESS
WEIGHT
G90
YIELD
STRESS
SECTION
MODULUS
DEFLECTION MOMENT
OF INERTIA
in psf ksi MID SPAN
in3
SUPPORT
in3
MID SPAN
in4
0.030 1.77 33 0.472 0.473 0.814
0.036 2.11 33 0.599 0.601 0.982
0.048 2.80 33 0.846 0.846 1.31
BASE STEEL
THICKNESS
MASS
Z275
YIELD
STRESS
SECTION
MODULUS
DEFLECTION MOMENT
OF INERTIA
mm kg/m MPa MID SPAN
x 103mm3
SUPPORT
x 103mm3
MID SPAN
x 106mm4
0.762 8.63 230 25.4 25.4 1.09
0.914 10.3 230 32.1 32.3 1.34
1.22 13.7 230 45.5 45.5 1.79