image of 4-150
image of 4-150
image of 4-150
image of 4-150
image of 4-150
image of 4-150
image of 4-150
image of 4-150

4-150

Ideal for both roof and wall applications, Agway 4-150 profile panels are extremely popular for pre-engineered buildings and can also be used in a wide variety of industrial and commercial applications. The 36” wide panels are available in a range of thickness and finishes.


Measurement Type


Profile Picture

image of profile picture in imperial

1. Steel conforms to ASTM A653.
2. Section properties are in accordance with CSA-S136-07.
3. Values in row “S” are based on strength.
4. Values in row “D” are based on a deflection limit of 1/180 of the span.
5. Web crippling not included in strength values. See example calculation in notes to designer.
6. Contact the sales department for stocked colours and gauges.
7. The load table contained on this data sheet was prepared by Dr. R.M. Schuster P.Eng. Professor Emeritus of Structural Engineering, University of Waterloo, Ontario, Canada.

image of profile picture in metric

1. Steel conforms to ASTM A653.
2. Section properties are in accordance with CSA-S136-07.
3. Values in row “S” are based on strength.
4. Values in row “D” are based on a deflection limit of 1/180 of the span.
5. Web crippling not included in strength values. See example calculation in notes to designer.
6. Contact the sales department for stocked colours and gauges.
7. The load table contained on this data sheet was prepared by Dr. R.M. Schuster P.Eng. Professor Emeritus of Structural Engineering, University of Waterloo, Ontario, Canada.

Specifications

GAUGE LENGTH COVERAGE
MINIMUM MAXIMUM MINIMUM MAXIMUM
29 22 10 828 36
GAUGE LENGTH COVERAGE
MINIMUM MAXIMUM MINIMUM MAXIMUM
29 22 254 21.03 914

Section Properties

BASE STEEL
THICKNESS
WEIGHT
G90
YIELD
STRESS
SECTION
MODULUS
DEFLECTION MOMENT
OF INERTIA
in psf ksi MID SPAN
in3
SUPPORT
in3
MID SPAN
in4
0.0135 0.73 80 0.0340 0.0278 0.0455
0.0150 0.80 33 0.0428 0.0364 0.0564
0.0180 0.95 50 0.0509 0.0432 0.0673
0.0240 1.25 33 0.0777 0.0674 0.0938
0.0300 1.55 33 0.101 0.0867 0.117
BASE STEEL
THICKNESS
MASS
Z275
YIELD
STRESS
SECTION
MODULUS
DEFLECTION MOMENT
OF INERTIA
mm kg/m MPa MID SPAN
x103mm3
SUPPORT
x103mm3
MID SPAN
x103mm3
0.343 3.55 550 1.83 1.49 0.0621
0.381 3.91 230 2.30 1.95 0.0769
0.457 4.64 345 2.74 2.32 0.0919
0.610 6.09 230 4.17 3.62 0.128
0.762 7.54 230 5.45 4.66 0.160