Agricultural Soffits
Introduction
Easy to handle and install, Agway V-Rib Soffits, CH5-32 Vented Soffits and Agri Soffit panels in 26 or 29 gauge, are available in rollformed or custom lengths up to 10 ft., in a variety of finishes or colours.
Applications
Resources
Measurement Type
Profile Picture
V-Rib Soffit Panels
- Custom lengths from 1’-0” to 12’-0”
- Perforated in lengths up to 12’-0”
- Available in 29, 26 and 24 ga.
- Venting available in round or slotted holes
- Stiffener Ribs available in V-Rib or Bubble Rib Maximum length: V-Rib: 12’ – 0”, Bubble Rib: 10’ – 0”
- Prepainted Steel, Aluminum, Copper, Stainless Steel and Zinc
- Precut to required length – no field cutting
- Attractive appearance
- Easy installation – secure with screws or nails to underside of overhang
Vented Soffit CH5-32
- Rollform lengths from 0’-10” to 45’-0”
- Continuously vented on top face 1/8” dia. holes on 3/8” centres
- Stocked in 26 ga. prepainted steel QC18317 White White
- Other colours available upon request. Contact our estimating department for details
- Excellent free air area of 6%
Soffit Panels
- Manufactured from 26 or 29 ga. Prepainted Steel
- Prepainted Steel, Aluminum, Copper, Stainless Steel and Zinc
- Custom lengths up to 10’
- Precut to required length – no field cutting
- Attractive appearance
- Easy installation – secure with screws or nails to underside of overhang
Applications
- Non-vented: To cover underside of building overhang (soffit)
- Vented: To allow outside air to enter the building and create cross-ventilation
- Venting available in round or slotted holes
- Use in conjunction with roof ventilators
V-Rib Soffit Panels
- Custom lengths from 305 mm to 3.7 m
- Perforated in lengths up to 3.7 m
- Available in 29, 26 and 24 ga.
- Venting available in round or slotted holes
- Stiffener Ribs available in V-Rib or Bubble Rib Maximum length: V-Rib: 3.7 m, Bubble Rib: 3.1 m
- Prepainted Steel, Aluminum, Copper, Stainless Steel and Zinc
- Precut to required length – no field cutting
- Attractive appearance
- Easy installation – secure with screws or nails to underside of overhang
Vented Soffit CH5-32
- Rollform lengths from 254 mm to 13.7 m
- Continuously vented on top face 3 mm dia. holes on 9.5 mm centres
- Stocked in 26 ga. prepainted steel QC18317 White White
- Other colours available upon request. Contact our estimating department for details
- Excellent free air area of 6%
Soffit Panels
- Manufactured from 26 or 29 ga. Prepainted Steel
- Prepainted Steel, Aluminum, Copper, Stainless Steel and Zinc
- Custom lengths up to 3.1 m
- Precut to required length – no field cutting
- Attractive appearance
- Easy installation – secure with screws or nails to underside of overhang
Applications
- Non-vented: To cover underside of building overhang (soffit)
- Vented: To allow outside air to enter the building and create cross-ventilation
- Venting available in round or slotted holes
- Use in conjunction with roof ventilators
