image of AL-315
image of AL-315
image of AL-315
image of AL-315
image of AL-315
image of AL-315
image of AL-315
image of AL-315

AL-315

Agway’s pre-caulked AL-315 liner panel, is available in a variety of thicknesses, provides a clean interior wall surface while acting as a vapour barrier in an insulated wall system. It boasts clean, aesthetically pleasing lines and is available in a range of standard colours and finishes.

Applications

agricultural icon
business icon
residential icon

Measurement Type


Profile Picture

image of profile picture in imperial

1. This liner sheet does not contribute to the structural performance of the panel.
2. All external loads and deflection requirements must be supported by the outer sheet.
3. Recommended usage guide:
Spans up to 6’- 0.018”
Spans 6’ to 8’- 0.024”
Spans 8’ to 10’- 0.030”
Spans over 10’-consult your sales representative
4. The prime purpose of the liner sheet is to provide a vapour barrier.
5. Oil canning may be present due to thickness and coverage. Oil canning is not a valid reason for rejection of this product.

image of profile picture in metric

1. This liner sheet does not contribute to the structural performance of the panel.
2. All external loads and deflection requirements must be supported by the outer sheet.
3. Recommended usage guide:
Spans up to 6’- 0.018”
Spans 6’ to 8’- 0.024”
Spans 8’ to 10’- 0.030”
Spans over 10’-consult your sales representative
4. The prime purpose of the liner sheet is to provide a vapour barrier.
5. Oil canning may be present due to thickness and coverage. Oil canning is not a valid reason for rejection of this product.

Specifications

GAUGE LENGTH COVERAGE
MINIMUM MAXIMUM MINIMUM MAXIMUM
26 18 52 540 31.5
GAUGE LENGTH COVERAGE
MINIMUM MAXIMUM MINIMUM MAXIMUM
22 18 1321 13.27 800

Section Properties

BASE STEEL
THICKNESS
WEIGHT
G90
YIELD
STRESS
SECTION
MODULUS
DEFLECTION MOMENT
OF INERTIA
in psf ksi MID SPAN
in3
SUPPORT
in3
MID SPAN
in4
0.018 0.937 33
0.024 1.25 33
0.030 1.52 33
BASE STEEL
THICKNESS
MASS
Z275
YIELD
STRESS
SECTION
MODULUS
DEFLECTION MOMENT
OF INERTIA
mm kg/m MPa MID SPAN
x103mm3
SUPPORT
x103mm3
MID SPAN
x103mm3
0.457 4.57 230
0.610 6.10 230
0.762 7.42 230