image of RD75-150 | RD75-150 CL
image of RD75-150 | RD75-150 CL

RD75-150 | RD75-150 CL

Agway’s 75 series roof deck panels offer the highest strength-to-weight ratios available; the RD75-150 profile is a 24” wide panel featuring 3” deep flutes, spaced 6” apart, resulting in our strongest roof deck offering.

Our structural roof deck sections are available in a wide range of gauges in Galvanneal, galvanized or prepainted finishes: these options enable customers to determine the optimal combination of strength, performance, and affordability that best satisfies project-specific criteria. Agway roof deck sections are also available in an acoustic format with pre-punched holes in the webs of the deck which combine with acoustic batt insulation to significantly reduce ambient noise within a structure.

Bundled deck produced from either Galvanneal or G90 Galvanized coated steel is susceptible to storage stain when exposed to the elements. This staining is superficial only and is not a valid reason for rejection of this product.

For more information, refer to CSSBI Fact Sheet #33


Measurement Type


Profile Picture

image of profile picture in imperial
image of profile picture in imperial

1. Steel conforms to ASTM A653.
2. Section properties are in accordance with CSA-S136-07.
3. Values in row “S” are based on strength.
4. Values in row “D” are based on a deflection limit of 1/240 of the span.
5. Web crippling not included in strength values. See example calculation in notes to designer.
6. Contact the sales department for stocked colours and gauges.
7. The load table contained on this data sheet was prepared by Dr. R.M. Schuster P.Eng. Professor Emeritus of Structural Engineering, University of Waterloo, Ontario, Canada.

image of profile picture in metric
image of profile picture in metric

1. Steel conforms to ASTM A653.
2. Section properties are in accordance with CSA-S136-07.
3. Values in row “S” are based on strength.
4. Values in row “D” are based on a deflection limit of 1/240 of the span.
5. Web crippling not included in strength values. See example calculation in notes to designer.
6. Contact the sales department for stocked colours and gauges.
7. The load table contained on this data sheet was prepared by Dr. R.M. Schuster P.Eng. Professor Emeritus of Structural Engineering, University of Waterloo, Ontario, Canada.

Specifications

GAUGE LENGTH COVERAGE
MINIMUM MAXIMUM MINIMUM MAXIMUM
22 16 48" 600" 24"
GAUGE LENGTH COVERAGE
MINIMUM MAXIMUM MINIMUM MAXIMUM
22 16 1219.2 mm 15.24 m 610 mm

Section Properties

BASE STEEL
THICKNESS
WEIGHT
G90
YIELD
STRESS
SECTION
MODULUS
DEFLECTION MOMENT
OF INERTIA
in psf ksi MID SPAN
in3
SUPPORT
in3
MID SPAN
in4
0.030 2.34 33 0.485 0.492 0.866
0.036 2.80 33 0.621 0.624 1.07
0.048 3.71 33 0.882 0.898 1.46
0.060 4.63 33 1.12 1.12 1.82
BASE STEEL
THICKNESS
MASS
Z275
YIELD
STRESS
SECTION
MODULUS
DEFLECTION MOMENT
OF INERTIA
mm kg/m MPa MID SPAN
x103mm3
SUPPORT
x103mm3
MID SPAN
x103mm3
0.762 11.7 230 26.0 26.4 1.18
0.914 13.7 230 33.3 33.4 1.46
1.22 18.1 230 47.4 48.2 2.00
1.52 22.6 230 60.0 60.3 2.49