image of Sub-Girts
image of Sub-Girts

Sub-Girts

Substructural Components SUB-GIRT is used extensively in the framing of roofing, siding, and coping. Also available are Hats, Channels, Angles – which represent the broadest selection of cold-formed substructural components in the industry. Primary advantages to metal framing includes ease of installation in the field. Lengths available in 10’, 16’ and 20’ lengths. Custom lengths are also available.

Applications

agricultural icon
business icon
residential icon

schemetic of different sub-grits

Standard Breakshapes

  • Available in 22 to 12 Gauge Galvinaized G-90 Grade 33
  • Available in 10′, 16′ and 20′ lengths
  • Custom lengths available

Custom Operations

  • Length capabilities up to 20’
  • Punching and Notching
  • Brackets and Clips
  • Flat Straps
  • Custom Notched Bars to match any Cladding/Roofing Profile

Materials

  • Stock: Galvanneal, Galvanized and Galvalume Prepainted
  • Also available in: Aluminum, Stainless Steel

Retrofit Notched Z Bar for Existing Metal Roofs

Retrofit Notched Z Bar for Existing Metal Roofs

Commercial Sub-Girts

Z-Bar

Standard in 10′ 0″
(3048 mm Lengths)
Notched for AL-315
Profile in 31″ Lengths
 schemetic for z-bar
NO NO DIMENSION X
Z-75 3/4″   (19 mm)
Z-100 1″   (25 mm)
Z-150 NZ-150 1-1/2″   (38 mm)
Z-200 NZ-200 2″   (51 mm)
Z-250 NZ-250 2-1/2″   (64 mm)
Z-300 NZ-300 3″   (76 mm)
Z-350 NZ-350 3-1/2″   (89 mm)
Z-400 NZ-400 4″   (102 mm)
Z-450 NZ-450 4-1/2″   (114 mm)
Z-500 NZ-500 5″   (127 mm)
Z-550 NZ-550 5-1/2″   (140 mm)
Z-600 NZ-600 6″   (152 mm)
Z-650 NZ-650 6-1/2″ (165 mm)
Z-700 NZ-700 7″ (178 mm)
Z-750 NZ-750 7-1/2″ (191 mm)
7-800 NZ-800 8″ (204 mm)

U-Bar

Standard in 10′ 0″
(3048 mm Lengths)
 schemitic for u-bar
NO DIMENSION X
U-75 3/4″   (19 mm)
U-100 1″   (25 mm)
U-150 1-1/2″   (38 mm)
U-200 2″   (51 mm)
U-250 2-1/2″   (64 mm)
U-300 3″   (76 mm)
U-350 3-1/2″   (89 mm)
U-400 4″   (102 mm)
U-450 4-1/2″   (114 mm)
U-500 5″   (127 mm)
U-550 5-1/2″   (140 mm)
U-600 6″   (152 mm)
U-650 6-1/2″ (165 mm)
U-700 7″ (178 mm)
U-750 7-1/2″ (191 mm)
U-800 8″ (204 mm)

Hat Section

Standard in 10′ 0″
(3048 mm Lengths)
schematic for hat section
NO DIMENSION X DIMENSION YY
H-62 5/8″   (16 mm) 1-1/2″   (38 mm)
H-75 3/4″   (19 mm) 1-1/2″   (38 mm)
H-100 1″   (25 mm) 1 – 1/2″   (38 mm)
H-150 1-1/2″   (38 mm) 1-1/2″   (38 mm)
H-200 2″   (51 mm) 2″   (51 mm)
H-250 2-1/2″   (64 mm) 2-1/2″   (64 mm)
H-300 3″   (76 mm) 3 ”   (76 mm)

 

  •  18 Gauge Galvanized is standard.
  • 16 or 14 Gauge available on request.
  • Available in 10’-0”, 16’-0” and 20’-0” lengths.
  • Custom sizes (not shown) can also be produced.
  • Custom lengths available.

Measurement Type