7/8" Corrugated
7/8" Corrugated
An Exposed Fastener System, the 7/8” Corrugated profile demonstrates the versatility of AGWAY profile designs. Because this Exposed Fastener Profile is both economical and very easy to install, it is a popular choice for many industrial and commercial applications with high slope applications.
Moreover, its load bearing capabilities enable AGWAY’s 7/8 Corrugated profile system components to function as a structural members. Panels are available in various shapes and styles, in a full range of stock colours with colour matched fasteners, and trims.
1. Steel conforms to ASTM A653.
2. Section properties are in accordance with CSA-S136-07.
3. Values in row “S” are based on strength.
4. Values in row “D” are based on a deflection limit of 1/180 of the span.
5. Web crippling not included in strength values. See example calculation in notes to designer.
6. Contact the sales department for stocked colours and gauges.
7. The load table contained on this data sheet was prepared by Dr. R.M. Schuster P.Eng. Professor Emeritus of Structural Engineering, University of Waterloo, Ontario, Canada.
| Base Steel Thickness |
Weight G90 |
Yield Stress |
Section Modulus |
Deflection Moment of Inertia |
|
|---|---|---|---|---|---|
| Mid Span | Support | Mid Span | |||
| in | psf | ksi | in3 | in3 | in4 |
| 0.018 | 1.00 | 33 | 0.0566 | 0.0566 | 0.0248 |
| 0.024 | 1.32 | 33 | 0.0743 | 0.0743 | 0.0325 |
| 0.030 | 1.64 | 33 | 0.0913 | 0.0913 | 0.0399 |
| 0.036 | 1.95 | 33 | 0.108 | 0.108 | 0.0471 |
| 0.048 | 2.58 | 33 | 0.139 | 0.139 | 0.0607 |
| Base Steel Thickness |
Mass Z275 |
Yield Stress |
Section Modulus |
Deflection Moment of Inertia |
|
|---|---|---|---|---|---|
| Mid Span | Support | Mid Span | |||
| mm | kg/m | MPa | x 103 mm3 | x 103 mm3 | x 106 mm4 |
| 0.457 | 4.90 | 230 | 3.04 | 3.04 | 0.0338 |
| 0.610 | 6.44 | 230 | 3.99 | 3.99 | 0.0444 |
| 0.762 | 7.99 | 230 | 4.91 | 4.91 | 0.0545 |
| 0.914 | 9.53 | 230 | 5.79 | 5.79 | 0.0643 |
| 1.22 | 12.6 | 230 | 7.46 | 7.46 | 0.0829 |
