AR Standing Seam Roof

AR Standing Seam Roof

Applications
Agricultural
Business
Residential
Photo Galleries

Our Standing Seam AR metal roofing is available in 26, 24 and 22 gauge, in variable widths and with side lap rib heights of 1”, 1 ½” or 2”. AGWAY’s AR series also features optional, two-piece expansion clips to accommodate movement of the roof, and can be seamed at either 90º or180º. With a 180º seam and optional seam caulking, panels can be used on low slopes (AR-38 down to 1.5/12 and AR-50 down to 0.5/12).

Unlike many traditional alternatives like slate or tile, our Standing Seam Profile is easy to install, more cost effective, 100% recyclable and facilitates more creativity in design. In fact, this profile can even be curved!

Whether you choose a profile from our Standing Seam, Nail Strip, or Snap Lock roof cladding systems, the result will be a stunning, architecturally distinctive roof that installs easily and has no exposed fasteners. All these durable AGWAY roof cladding products are available in a full range of stock colours, in variable panel widths, and with optional stiffening flutes. All are single skin applications and must be applied over a solid substrate and waterproof membrane, using clips at a maximum of 2’ centres. A full range of flashings and accessories are available from Agway to complete your project.

Profile Drawings

Panel Specifications

 MIN/MAXMIN/MAXMIN/MAXMIN/MAX
 SLOPE MATERIAL THICKNESS SHEET LENGTHPANEL WIDTH
AR-253/12 - 12/120.018 - 0.030"
(0.457 - 0.762 mm) 
2' 6" - 45'
(0.76 - 13.71 m) 
10" - 28"
(254 - 711 mm) 
AR-381.5/12 - 12/120.018 - 0.030"
(0457 - 0.762 mm) 
2' 6" - 45'
(0.76 - 13.71 m) 
10" - 28"
(254 - 711 mm) 
AR-500.5/12 - 12/120.018 - 0.030"
(0457 - 0.762 mm)  
2' 6" - 45'
(0.76 - 13.71 m) 
10" - 28"
(254 - 711 mm) 

Longer sheets are available. Additional charges may apply.

Standard Panel Widths

GAUGEAR-25AR-38AR-50
2621.06"
(535 mm) 
20.06"
(509.5 mm) 
18.52"
(470 mm) 
2421.06"
(535 mm) 
20.06"
(509.5 mm) 
18.52"
(470 mm) 
2221.06"
(535 mm) 
20.06"
(509.5 mm) 
18.52"
(470 mm) 

Features

  • No exposed fasteners
  • Ease of installation
  • Full range of stock colours
  • Variable width
  • Optional stiffening flutes
  • Concealed hold-down clips
  • Knee Caps available
  • Optional two-piece expansion clip to accommodate roof movement
  • Seam can be 90° or 180° (see illustration)
  • Can be used on low slopes with a caulked 180° seam:
    • AR-38 down to 1.5/12  and;
    • AR-50 down to 0.5/12
  • Able to be curved - minimum sheet length: 5'-0" (1.52m)

Oil Canning

  • Oil Canning is naturally occurring phenomenon inherent in all sheet steel. 
  • Oil Canning is not a valid reason for rejection of these products

Installation

  • Single skin application
  • Recommended that this always be applied over solid substrate
  • Recommended that this be applied over waterproof membrane
  • Clips at maximum 2’ centers - 2 fasteners per clip
  • Mechanical and Hand Seamer provided to allow panels to be seamed

Hold-Down Clip Detail

Overlap Seaming Options