image of 7-150
image of 7-150
image of 7-150
image of 7-150
image of 7-150
image of 7-150

7-150

An exposed fastener system, the 7-150 profile demonstrates the versatility of Agway profile designs as it can be used as a roof or wall cladding. Moreover, its load bearing capabilities enable the 7-150 profile to function as a structural member. An economical system that’s easy to install, 7-150 is a popular choice for agricultural, industrial and commercial applications.

Agway’s 7-150 comes in a full range of stock colours, with colour matched fasteners, trims and accessories.


Measurement Type


Profile Picture

image of profile picture in imperial

1. Steel conforms to ASTM A653.
2. Section properties are in accordance with CSA-S136-07.
3. Values in row “S” are based on strength.
4. Values in row “D” are based on a deflection limit of 1/180 of the span.
5. Web crippling not included in strength values. See example calculation in notes to designer.
6. Contact the sales department for stocked colours and gauges.
7. The load table contained on this data sheet was prepared by Dr. R.M. Schuster P.Eng. Professor Emeritus of Structural Engineering, University of Waterloo, Ontario, Canada.

image of profile picture in metric

1. Steel conforms to ASTM A653.
2. Section properties are in accordance with CSA-S136-07.
3. Values in row “S” are based on strength.
4. Values in row “D” are based on a deflection limit of 1/180 of the span.
5. Web crippling not included in strength values. See example calculation in notes to designer.
6. Contact the sales department for stocked colours and gauges.
7. The load table contained on this data sheet was prepared by Dr. R.M. Schuster P.Eng. Professor Emeritus of Structural Engineering, University of Waterloo, Ontario, Canada.

Specifications

GAUGE LENGTH COVERAGE
MINIMUM MAXIMUM MINIMUM MAXIMUM
26 20 10 780 36
26 20 10 780 30
26 20 10 780 24
GAUGE LENGTH COVERAGE
MINIMUM MAXIMUM MINIMUM MAXIMUM
26 20 254 19.81 914
26 20 254 19.81 780
26 20 254 19.81 610

Section Properties

BASE STEEL
THICKNESS
WEIGHT
G90
YIELD
STRESS
SECTION
MODULUS
DEFLECTION MOMENT
OF INERTIA
in psf ksi MID SPAN
in3
SUPPORT
in3
MID SPAN
in4
0.018 1.04 33 0.0940 0.0888 0.0985
0.024 1.36 33 0.136 0.127 0.132
0.030 1.69 33 0.175 0.162 0.165
0.036 2.02 33 0.208 0.198 0.197
BASE STEEL
THICKNESS
MASS
Z275
YIELD
STRESS
SECTION
MODULUS
DEFLECTION MOMENT
OF INERTIA
mm kg/m MPa MID SPAN
x103mm3
SUPPORT
x103mm3
MID SPAN
x103mm3
0.457 5.06 230 5.05 4.77 0.134
0.610 6.66 230 7.28 6.82 0.180
0.762 8.25 230 9.38 8.73 0.225
0.914 9.85 230 11.2 10.7 0.270